Description
Power Bond
Description
Powerbond Motor Vehicle Body Adhesive – 225
Technical Data
Chemical Basis: Epoxy Resin
Color: Black
Density: 1.1 g/cm3
Application temperature: +59?F to +77?F
Application time: 60 minutes*
Hardening Time: 4 hours*
Final strength: After 72 hours*
Shore D hardness (DIN 53505): 80
Tensile strength (ASTM D-638): 30 MPa*
Tensile shear strength (EN 1465): 1.7 MPa (after 4 hours)*, 13.3 MPa (after 8 hours)*, 19.0 MPa (after 17 hours)*
Resistant to: Fuels (petrol, diesel oil), motor and transmission oil, coolant
Thermal stability: -22?F to +248?F (for short peaks up to +374?F)
Shelf Life: 12 months
*measured at 73.4?F
High-strength two-component epoxy resin system for repairs to motor vehicle bodies.
Features
High-strength epoxy resin adhesive
– The repair restores the original strength and stiffness.
– Fewer spot welds
– Meets the requirements of motor-vehicle manufacturers
Glass-particle technology
– Even if strong pressure is exerted, an adhesive thickness of 0.7 to1.2 mm remains
Excellent stability
– The adhesive will not run on vertical surfaces (thixotropic)
Excellent corrosion protection
– The original rust resistance is maintained
– Corrosion is prevented at welds
Can be through-welded
Can be ground and painted over
Free of silicone and VOC
Applications
Structural adhesive for steel, aluminum and fiber-reinforced plas-tics (FRP, CFRP). For gluing motor vehicle body parts such as side-walls, wheel arches, roof and door plates.
Note
Not suited for load-bearing vehicle body parts (e.g. A-pillar, frame side bar). If body parts are only partially replaced, do not glue on visible surfaces since shadow seams may appear. Observe the vehicle manufacturers repair instructions.
Reviews
There are no reviews yet.